Parts List of Shapeoko 2 Compatible MakerCarve Mechanical Kit

The parts list of Shapeoko 2 compatible MakerCarve mechanical kit is listed with quantity as follows:

1. MDF x 2
2. X/Y Axis Rail Extrusion x 4
3. Z-Axis Rail Extrusion x 1
4. 20x20x527mm Extrusion x 2
5. Motor Mount Plate x 4
6. End Plate x 4
7. Z-Axis Motor Mount Plate x 2
8. Spindle Mount Plate x 1
9. Z-Axis Shim Plate x 1
10. Universal Spindle Mount And Mount Strap x 2
11. Delrin V-Wheel x 20
12. Smooth Idler Wheel x 6
13. M5 Shim Washer x 26
14. 5x16x5 Bearing (625-2RS) x 52
15. Eccentric Nut x 10
16. M5 Flat Washer x 108
17. Delrin Lead Nut x 1
18. M8x200mm Threaded Rod x 1
19. 8x22x7 Flange Bearing (F608-ZZ) x 1
20. M3x12mm, SHCS x 3
21. M3 Flate Washer x 3
22. Wave Disc Spring x 1
23. 3x8mm Nylon Spacer x 6
24. 5x10mm Nylon Spacer x 4
25. Z-Axis Coupler 5mm-8mm x 1
26. M3x50mm Standoff Spacer x 3
27. M3x10mm, Set Screw x 3
28. Fiberglass Belt Clip x 6
29. 3/8"x5/16" #12 Spacer x 10
30. 3/8"x1" #12 Spacer x 6
31. 3/8"x1-1/4" #12 Spacer x 6
32. M5x10mm, BHCS x 4 (Z-Axis Extrusion)
33. M5x12mm, BHCS x 38
34. M5x20mm, BHCS x 18 (Motor Mount Carriage V-Wheel x 12 + Z Assembly Carriage V-Wheel x 4 + Z-Axis Motor Mount x 2)
35. M5x30mm, BHCS x 10 (Motor Mount Carriage Idler x 6 + Spindle Carriage V-Wheel x 4)
36. M5x8mm, SHCS x 6 (Belt Clip)
37. M5x45mm, SHCS x 4 (Universal Spindle Mount Strap)
38. M5x70mm, SHCS x 6
39. M5 Flat Nut x10 (Z-Axis Extrusion x 4 + Belt Clip x 6)
40. M8 Flat Nut x 2 (M8 Threaded Rod)
41. M5 Hex Nut x 26
42. M5 T-Nut x 16 (20x20x527mm Extrusion - MDF And End Plate)
43. Spare Parts Pack x 1 (M5 Flat Washer x 12 + M5 T-Nut x 2)

Update (Jul. 25, 2015)  The following is the packing list of MakerCarve mechanical kit:

Update (Nov. 28, 2016) Shapeoko 2 Assembly Video

Shapeoko 2 Works Kit Tutorial - Desktop CNC 3D Carver Router by Inventables

https://www.youtube.com/watch?v=Yy6A3Mif0QY

MakerCarve - A Shapeoko 2 Compatible CNC Router/Carving/Engraving Machine

MakerCarve is a Shapeoko 2 compatible machine with some modification listed bellow:

1. Mechanical Kit
A. Tapped SlideSlot aluminium rail extrusions are used instead of MakerSlide
B. All plates are made of aluminium
C. End plates are 5mm in thickness to increase stiffness
D. 2020 aluminium extrusions are 527mm in length

2. Electronic Kit
A. The grblShield is replaced by CNC Shield
B. Belt locking torsion springs are used

3. Software
A. GRBL Controller (G-Code Sender) is preferred to Universal-G-Code-Sender

To enable MakerCarve function well, the Arduino Uno R3 must be uploaded with grbl firmware (hex file) and properly configured. To upload grbl hex file, XLoader is used.
A. GRBL Homepage
B. Quick GRBL (Arduino G-Code Interpreter) Setup Guide For Windows
C. GRBL Configuration Page

To assembly, methods and tools used in Shapeoko Rebuild are recommended.

To engrave or to carve, the free open source F-Engrave is used.