Showing posts with label Date. Show all posts
Showing posts with label Date. Show all posts
2013/08/15
Analog Sensor Data Logger
Create data file name:MMDDhhmm.CSV where M means month, D means day, h means hour and m means minute respectively. Once the reset on Arduino board is pressed, a new logger file is created.
An altenative is to use a DS1307 RTC shield (such as RTC Sensor Shield) and a SD shield.
This is the new version of the post on May 01, 2012 with the difference of using Time.h library.
Pin Used
Analog pin 3 is used for LM35 temperature sensor.
Analog pins 4 and 5 are used for I2C protocol implemented by Maxim DS1307.
Digital pins 10, 11, 12, 13 are used for SPI protocol to save data file to micro SD card.
Time.h Download
http://playground.arduino.cc//Code/Time
Sketch
// File Name: AnalogDataLoggerTimeLibrary.ino
// The sketch works on Arduino IDE 1.05
#include <SD.h>
#include <Wire.h>
#include <Time.h>
#include <DS1307RTC.h>
#define analogSensorStart 3
#define analogSensorEnd 3
File file; // test file
const uint8_t SD_CS = 10; // SD chip select
String file_name = ""; // file name should not prefix with "prefix_word"
char fn[] = "MMDDHHMM.CSV";
int i=0;
int displayAtSecond = 0;
time_t t;
//------------------------------------------------------------------------------
// call back for file timestamps
void dateTime(uint16_t* date, uint16_t* time) {
time_t timeStamp = now();
// return date using FAT_DATE macro to format fields
*date = FAT_DATE(year(timeStamp), month(timeStamp), day(timeStamp));
// return time using FAT_TIME macro to format fields
*time = FAT_TIME(hour(timeStamp), minute(timeStamp), second(timeStamp));
}
//------------------------------------------------------------------------------
void setup() {
Serial.begin(9600);
Wire.begin();
setSyncProvider(RTC.get); // the function to get the time from the RTC
if (timeStatus() != timeSet)
Serial.println("Unable to sync with the RTC");
else
Serial.println("RTC has set the system time");
// set date time callback function
SdFile::dateTimeCallback(dateTime);
t = now();
if (month(t) < 10) {
file_name = String(file_name + '0' + String(month(t), DEC));
}
else {
file_name = String(file_name +String(month(t), DEC));
}
if (day(t) < 10) {
file_name = String(file_name + '0' + String(day(t), DEC));
}
else {
file_name = String(file_name +String(day(t), DEC));
}
if (hour(t) < 10) {
file_name = String(file_name + '0' + String(hour(t), DEC));
}
else {
file_name = String(file_name +String(hour(t), DEC));
}
if (minute(t) < 10) {
file_name = String(file_name + '0' + String(minute(t), DEC));
}
else {
file_name = String(file_name +String(minute(t), DEC));
}
file_name = String(file_name + ".CSV");
for (i=0;i<=file_name.length();i++) {
fn[i] = file_name.charAt(i);
}
if (!SD.begin(SD_CS)) {
Serial.println("SD failed");
while(1);
}
Serial.print("File Name: ");
Serial.println(fn);
}
//------------------------------------------------------------------------------
void loop()
{
t = now();
if (displayAtSecond != second(t)) {
analogSensorDataLogger();
displayAtSecond = second(t);
}
}
void analogSensorDataLogger() {
String data_string = "";
data_string = String(year(t), DEC);
data_string += "/";
if (month(t) < 10) {
data_string = String(data_string + '0' + String(month(t), DEC));
}
else {
data_string = String(data_string +String(month(t), DEC));
}
data_string += "/";
if (day(t) < 10) {
data_string = String(data_string + '0' + String(day(t), DEC));
}
else {
data_string = String(data_string +String(day(t), DEC));
}
data_string += " ";
if (hour(t) < 10) {
data_string = String(data_string + '0' + String(hour(t), DEC));
}
else {
data_string = String(data_string +String(hour(t), DEC));
}
data_string += ":";
if (minute(t) < 10) {
data_string = String(data_string + '0' + String(minute(t), DEC));
}
else {
data_string = String(data_string +String(minute(t), DEC));
}
data_string += ":";
if (second(t) < 10) {
data_string = String(data_string + '0' + String(second(t), DEC));
}
else {
data_string = String(data_string +String(second(t), DEC));
}
data_string += ",";
//read sensor value from A0-A3 and append to the string
for (int analogPin = analogSensorStart; analogPin <= analogSensorEnd; analogPin++)
{
int sensor = analogRead(analogPin);
data_string += String(sensor);
if (analogPin < analogSensorEnd) {
data_string += ",";
}
}
file = SD.open(fn, FILE_WRITE);
if (file) {
file.println(data_string);
file.close();
Serial.println(data_string);
}
else {
Serial.print("error opening ");
Serial.println(fn);
}
}
2013/07/29
LCD Display Date, Time, Weekday From DS1307 And Temperature From LM35
Date and time is useful for many applications. Most visitors to my blog search for rtc stuff. The following sketch show a simple application using a LCD shield, a RTC Sensor shield and a LM35 temperature sensor to display date, time, weekday, and environmental temperature. To use the sketch, you need to download the Time library.
The sketch is a new version of the sketches post on Jun. 3, 2012 and May. 3, 2013 using Time.h library and showing weekday.
Output
Sketch
/*
* TimeRTC.pde
* example code illustrating Time library with Real Time Clock.
* the sketch works on Arduino IDE 1.05
* 1) modified by Befun Hung on Jul. 28, 2013
* changing the sequence to year, month, day, hour, minute, second
* adding the day of week
* almost same function as sketch on May 1, 2012
* 2) modified by Befun Hung on Jul. 29, 2013
* change display device to LCD Shield
* adding temperature readout from LM35
* the sketch does not contain delay() in the loop section
*/
#include <Time.h>
#include <Wire.h>
#include <DS1307RTC.h> // a basic DS1307 library that returns time as a time_t
#include <LiquidCrystal.h>
LiquidCrystal lcd(8,9,4,5,6,7);
char *dayOfWeek[] = {"", "SUN", "MON", "TUE", "WED", "THU", "FRI", "SAT"};
int potPin = 3; // change potPin value to 0, 1, 2 for A0, A1, A2 respectly
float temperature = 0;
int displayAtSecond;
void setup() {
lcd.begin(16,2);
lcd.print("*cheaphousetek*");
lcd.setCursor(0,1);
setSyncProvider(RTC.get); // the function to get the time from the RTC
if(timeStatus()!= timeSet)
lcd.print("Unable to sync");
else
lcd.print("Sync system time ");
displayAtSecond = second();
delay(2000);
lcd.clear();
}
void loop()
{
if (displayAtSecond != second()) {
digitalClockDisplay();
displayAtSecond = second();
}
}
void printTenths(long value) {
// prints a value of 123 as 12.3
lcd.setCursor(10,1);
lcd.print(value / 10);
lcd.setCursor(12,1);
lcd.print('.');
lcd.setCursor(13,1);
lcd.print(value % 10);
}
void digitalClockDisplay(){
// digital clock display of the time
int span = 10;
long aRead = 0;
unsigned long temp;
lcd.setCursor(0,0);
lcd.print(year());
lcd.print('-');
if (month() < 10) {
lcd.print('0');
}
lcd.print(month());
lcd.print('-');
if (day() < 10) {
lcd.print('0');
}
lcd.print(day());
lcd.print(' ');
lcd.setCursor(11,0);
lcd.print(dayOfWeek[weekday()]);
lcd.setCursor(0,1);
if (hour() < 10) {
lcd.print('0');
}
lcd.print(hour());
lcd.print(':');
if (minute() < 10) {
lcd.print('0');
}
lcd.print(minute());
lcd.print(':');
if (second() < 10) {
lcd.print('0');
}
lcd.print(second());
lcd.print(' ');
for (int i=0;i<span;i++) {
aRead = aRead + analogRead(potPin);
}
temperature = (aRead / span * 500.0 / 1024.0); // for other analog sensor change the constants
printTenths(long (temperature * 10));
lcd.setCursor(14,1);
lcd.print(char(223));
lcd.setCursor(15,1);
lcd.print('C');
}
The sketch is a new version of the sketches post on Jun. 3, 2012 and May. 3, 2013 using Time.h library and showing weekday.
Output
Sketch
/*
* TimeRTC.pde
* example code illustrating Time library with Real Time Clock.
* the sketch works on Arduino IDE 1.05
* 1) modified by Befun Hung on Jul. 28, 2013
* changing the sequence to year, month, day, hour, minute, second
* adding the day of week
* almost same function as sketch on May 1, 2012
* 2) modified by Befun Hung on Jul. 29, 2013
* change display device to LCD Shield
* adding temperature readout from LM35
* the sketch does not contain delay() in the loop section
*/
#include <Time.h>
#include <Wire.h>
#include <DS1307RTC.h> // a basic DS1307 library that returns time as a time_t
#include <LiquidCrystal.h>
LiquidCrystal lcd(8,9,4,5,6,7);
char *dayOfWeek[] = {"", "SUN", "MON", "TUE", "WED", "THU", "FRI", "SAT"};
int potPin = 3; // change potPin value to 0, 1, 2 for A0, A1, A2 respectly
float temperature = 0;
int displayAtSecond;
void setup() {
lcd.begin(16,2);
lcd.print("*cheaphousetek*");
lcd.setCursor(0,1);
setSyncProvider(RTC.get); // the function to get the time from the RTC
if(timeStatus()!= timeSet)
lcd.print("Unable to sync");
else
lcd.print("Sync system time ");
displayAtSecond = second();
delay(2000);
lcd.clear();
}
void loop()
{
if (displayAtSecond != second()) {
digitalClockDisplay();
displayAtSecond = second();
}
}
void printTenths(long value) {
// prints a value of 123 as 12.3
lcd.setCursor(10,1);
lcd.print(value / 10);
lcd.setCursor(12,1);
lcd.print('.');
lcd.setCursor(13,1);
lcd.print(value % 10);
}
void digitalClockDisplay(){
// digital clock display of the time
int span = 10;
long aRead = 0;
unsigned long temp;
lcd.setCursor(0,0);
lcd.print(year());
lcd.print('-');
if (month() < 10) {
lcd.print('0');
}
lcd.print(month());
lcd.print('-');
if (day() < 10) {
lcd.print('0');
}
lcd.print(day());
lcd.print(' ');
lcd.setCursor(11,0);
lcd.print(dayOfWeek[weekday()]);
lcd.setCursor(0,1);
if (hour() < 10) {
lcd.print('0');
}
lcd.print(hour());
lcd.print(':');
if (minute() < 10) {
lcd.print('0');
}
lcd.print(minute());
lcd.print(':');
if (second() < 10) {
lcd.print('0');
}
lcd.print(second());
lcd.print(' ');
for (int i=0;i<span;i++) {
aRead = aRead + analogRead(potPin);
}
temperature = (aRead / span * 500.0 / 1024.0); // for other analog sensor change the constants
printTenths(long (temperature * 10));
lcd.setCursor(14,1);
lcd.print(char(223));
lcd.setCursor(15,1);
lcd.print('C');
}
Labels:
Arduino,
Date,
Datetime,
DS1307,
Freeduino,
LCD,
LCDKeypad,
LCDKeypad shield,
LM35,
Real Time Clock,
RTC,
Sensor,
Shield,
Temperature,
Time
2013/07/28
Display Date and Time In Arduino Serial Monitor Using Time.h
First, Download Time.h from the following link.
http://playground.arduino.cc/uploads/Code/Time.zip
Read usage of Time.h library.
http://playground.arduino.cc/Code/time
The function is almost same as the sketch post on May 1, 2012, except adding displaying the day of week.
Pins Used
Analog pins 4.and 5 are used for I2C protocol implemented by Maxim DS1307.
Serial Monitor Output
Sketch
/*
* TimeRTC.pde
* example code illustrating Time library with Real Time Clock.
* the sketch works on Arduino IDE 1.05
* modified by Befun Horng on Jul. 28, 2013
* changing the sequence to year, month, day, hour, minute, second
* adding the day of week
* almost same function as sketch on May 1, 2012
*/
#include <Time.h>
#include <Wire.h>
#include <DS1307RTC.h> // a basic DS1307 library that returns time as a time_t
char *dayOfWeek[] = {"", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"};
void setup() {
Serial.begin(9600);
setSyncProvider(RTC.get); // the function to get the time from the RTC
if(timeStatus()!= timeSet)
Serial.println("Unable to sync with the RTC");
else
Serial.println("RTC has set the system time");
}
void loop()
{
digitalClockDisplay();
delay(1000);
}
void digitalClockDisplay(){
// digital clock display of the time
Serial.print(year());
Serial.print("-");
if (month() < 10) {
Serial.print('0');
}
Serial.print(month());
Serial.print("-");
if (day() < 10) {
Serial.print('0');
}
Serial.print(day());
Serial.print(" ");
Serial.print(dayOfWeek[weekday()]);
Serial.print(' ');
if (hour() < 10) {
Serial.print('0');
}
Serial.print(hour());
Serial.print(':');
if (minute() < 10) {
Serial.print('0');
}
Serial.print(minute());
Serial.print(':');
if (second() < 10) {
Serial.print('0');
}
Serial.print(second());
Serial.println();
}
http://playground.arduino.cc/uploads/Code/Time.zip
Read usage of Time.h library.
http://playground.arduino.cc/Code/time
The function is almost same as the sketch post on May 1, 2012, except adding displaying the day of week.
Pins Used
Analog pins 4.and 5 are used for I2C protocol implemented by Maxim DS1307.
Serial Monitor Output
Sketch
/*
* TimeRTC.pde
* example code illustrating Time library with Real Time Clock.
* the sketch works on Arduino IDE 1.05
* modified by Befun Horng on Jul. 28, 2013
* changing the sequence to year, month, day, hour, minute, second
* adding the day of week
* almost same function as sketch on May 1, 2012
*/
#include <Time.h>
#include <Wire.h>
#include <DS1307RTC.h> // a basic DS1307 library that returns time as a time_t
char *dayOfWeek[] = {"", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"};
void setup() {
Serial.begin(9600);
setSyncProvider(RTC.get); // the function to get the time from the RTC
if(timeStatus()!= timeSet)
Serial.println("Unable to sync with the RTC");
else
Serial.println("RTC has set the system time");
}
void loop()
{
digitalClockDisplay();
delay(1000);
}
void digitalClockDisplay(){
// digital clock display of the time
Serial.print(year());
Serial.print("-");
if (month() < 10) {
Serial.print('0');
}
Serial.print(month());
Serial.print("-");
if (day() < 10) {
Serial.print('0');
}
Serial.print(day());
Serial.print(" ");
Serial.print(dayOfWeek[weekday()]);
Serial.print(' ');
if (hour() < 10) {
Serial.print('0');
}
Serial.print(hour());
Serial.print(':');
if (minute() < 10) {
Serial.print('0');
}
Serial.print(minute());
Serial.print(':');
if (second() < 10) {
Serial.print('0');
}
Serial.print(second());
Serial.println();
}
Labels:
Arduino,
Date,
DS1307,
Freeduino,
Library,
Real Time Clock,
RTC,
Time,
Time Library,
Time.h
2013/05/03
LCD Displaying Date, Time From DS1307 And Temperature From LM35
Date and time is useful for many applications. Most visitors to my blog search for rtc stuff. The following sketch show a simple application using a LCD shield, a RTC Sensor shield and a LM35 temperature sensor to display date, time and enviromnental temperature. To use the sketch, you need to download the RTClib library.
There is a new version using Time.h library and showing weekday.
Output:
Sketch:
// Date and time functions using a DS1307 RTC connected via I2C and Wire lib
// 2010-02-04 <jcw@equi4.com> http://opensource.org/licenses/mit-license.php
// $Id: ds1307.pde 4773 2010-02-04 14:09:18Z jcw $
// Added LCD display and LM35 temperature function by Befun Hung 2011-10-13
// Take out displayDateTime procedure from loop() by Befun Hung 2013-05-03
// The sketch works on Arduino IDE 0022
#include <Wire.h>
#include <RTClib.h>
#include <LiquidCrystal.h>
LiquidCrystal lcd(8, 9, 4, 5, 6, 7);
RTC_DS1307 RTC;
// change potPin value to 0, 1, 2 for A0, A1, A2 respectly
int potPin = 3;
float temperature = 0;
void setup () {
Serial.begin(9600);
Wire.begin();
RTC.begin();
lcd.begin(16, 2);
lcd.print("*cheaphousetek*");
delay(5000);
lcd.clear();
// following line sets the RTC to the date & time this sketch was compiled
// RTC.adjust(DateTime(__DATE__, __TIME__));
}
void loop() {
displayDateTime();
}
void printTenths(long value) {
// prints a value of 123 as 12.3
Serial.print(value / 10);
Serial.print('.');
Serial.print(value % 10);
Serial.println();
lcd.setCursor(10, 1);
lcd.print(value / 10);
lcd.setCursor(12, 1);
lcd.print('.');
lcd.setCursor(13, 1);
lcd.print(value % 10);
}
void displayDateTime() {
DateTime now = RTC.now();
int span = 10;
long aRead = 0;
unsigned long tmp;
tmp = now.year();
Serial.print(now.year(), DEC);
lcd.setCursor(0, 0);
lcd.print(tmp);
Serial.print('/');
lcd.setCursor(4, 0);
lcd.print("-");
tmp = now.month();
if (now.month() < 10) {
Serial.print('0');
Serial.print(now.month(), DEC);
lcd.setCursor(5, 0);
lcd.print('0');
lcd.setCursor(6, 0);
lcd.print(tmp);
}
else {
Serial.print(now.month(), DEC);
lcd.setCursor(5, 0);
lcd.print(tmp);
}
Serial.print('/');
lcd.setCursor(7, 0);
lcd.print('-');
tmp = now.day();
if (now.day() < 10) {
Serial.print('0');
Serial.print(now.day());
lcd.setCursor(8, 0);
lcd.print('0');
lcd.setCursor(9, 0);
lcd.print(tmp);
}
else {
Serial.print(now.day(), DEC);
lcd.setCursor(8, 0);
lcd.print(tmp);
}
Serial.print(' ');
tmp = now.hour();
if (now.hour() < 10) {
Serial.print('0');
Serial.print(now.hour(), DEC);
lcd.setCursor(0, 1);
lcd.print('0');
lcd.setCursor(1, 1);
lcd.print(tmp);
}
else {
Serial.print(now.hour(), DEC);
lcd.setCursor(0, 1);
lcd.print(tmp);
}
Serial.print(':');
lcd.setCursor(2, 1);
lcd.print(':');
tmp = now.minute();
if (now.minute() < 10) {
Serial.print('0');
Serial.print(now.minute(), DEC);
lcd.setCursor(3, 1);
lcd.print('0');
lcd.setCursor(4, 1);
lcd.print(tmp);
}
else {
Serial.print(now.minute(), DEC);
lcd.setCursor(3, 1);
lcd.print(tmp);
}
Serial.print(':');
lcd.setCursor(5, 1);
lcd.print(':');
tmp = now.second();
if (now.second() < 10) {
Serial.print('0');
Serial.print(now.second(), DEC);
lcd.setCursor(6, 1);
lcd.print('0');
lcd.setCursor(7, 1);
lcd.print(tmp);
}
else {
Serial.print(now.second(), DEC);
lcd.setCursor(6, 1);
lcd.print(tmp);
}
Serial.print (' ');
lcd.setCursor(8, 1);
lcd.print(' ');
// Serial.println();
for (int i=0;i<span;i++) {
aRead = aRead + analogRead(potPin);
// Serial.print(aRead);
// Serial.print(' ');
}
// aRead = aRead / span;
temperature = (aRead / span * 500.0 / 1024.0);
// Serial.print(aRead);
// Serial.print(' ');
// Serial.print(temperature);
// Serial.print(' ');
printTenths(long (temperature * 10));
lcd.setCursor(14, 1);
lcd.print(char(223));
lcd.setCursor(15, 1);
lcd.print('C');
delay(200);
// Serial.print(" since 2000 = ");
// Serial.print(now.get());
// Serial.print("s = ");
// Serial.print(now.get() / 86400L);
// Serial.println("d");
// calculate a date which is 7 days and 30 seconds into the future
// DateTime future (now.get() + 7 * 86400L + 30);
// Serial.print(" now + 7d + 30s: ");
// Serial.print(future.year(), DEC);
// Serial.print('/');
// Serial.print(future.month(), DEC);
// Serial.print('/');
// Serial.print(future.day(), DEC);
// Serial.print(' ');
// Serial.print(future.hour(), DEC);
// Serial.print(':');
// Serial.print(future.minute(), DEC);
// Serial.print(':');
// Serial.print(future.second(), DEC);
// Serial.println();
// Serial.println();
// delay(3000);
}
There is a new version using Time.h library and showing weekday.
Output:
Sketch:
// Date and time functions using a DS1307 RTC connected via I2C and Wire lib
// 2010-02-04 <jcw@equi4.com> http://opensource.org/licenses/mit-license.php
// $Id: ds1307.pde 4773 2010-02-04 14:09:18Z jcw $
// Added LCD display and LM35 temperature function by Befun Hung 2011-10-13
// Take out displayDateTime procedure from loop() by Befun Hung 2013-05-03
// The sketch works on Arduino IDE 0022
#include <Wire.h>
#include <RTClib.h>
#include <LiquidCrystal.h>
LiquidCrystal lcd(8, 9, 4, 5, 6, 7);
RTC_DS1307 RTC;
// change potPin value to 0, 1, 2 for A0, A1, A2 respectly
int potPin = 3;
float temperature = 0;
void setup () {
Serial.begin(9600);
Wire.begin();
RTC.begin();
lcd.begin(16, 2);
lcd.print("*cheaphousetek*");
delay(5000);
lcd.clear();
// following line sets the RTC to the date & time this sketch was compiled
// RTC.adjust(DateTime(__DATE__, __TIME__));
}
void loop() {
displayDateTime();
}
void printTenths(long value) {
// prints a value of 123 as 12.3
Serial.print(value / 10);
Serial.print('.');
Serial.print(value % 10);
Serial.println();
lcd.setCursor(10, 1);
lcd.print(value / 10);
lcd.setCursor(12, 1);
lcd.print('.');
lcd.setCursor(13, 1);
lcd.print(value % 10);
}
void displayDateTime() {
DateTime now = RTC.now();
int span = 10;
long aRead = 0;
unsigned long tmp;
tmp = now.year();
Serial.print(now.year(), DEC);
lcd.setCursor(0, 0);
lcd.print(tmp);
Serial.print('/');
lcd.setCursor(4, 0);
lcd.print("-");
tmp = now.month();
if (now.month() < 10) {
Serial.print('0');
Serial.print(now.month(), DEC);
lcd.setCursor(5, 0);
lcd.print('0');
lcd.setCursor(6, 0);
lcd.print(tmp);
}
else {
Serial.print(now.month(), DEC);
lcd.setCursor(5, 0);
lcd.print(tmp);
}
Serial.print('/');
lcd.setCursor(7, 0);
lcd.print('-');
tmp = now.day();
if (now.day() < 10) {
Serial.print('0');
Serial.print(now.day());
lcd.setCursor(8, 0);
lcd.print('0');
lcd.setCursor(9, 0);
lcd.print(tmp);
}
else {
Serial.print(now.day(), DEC);
lcd.setCursor(8, 0);
lcd.print(tmp);
}
Serial.print(' ');
tmp = now.hour();
if (now.hour() < 10) {
Serial.print('0');
Serial.print(now.hour(), DEC);
lcd.setCursor(0, 1);
lcd.print('0');
lcd.setCursor(1, 1);
lcd.print(tmp);
}
else {
Serial.print(now.hour(), DEC);
lcd.setCursor(0, 1);
lcd.print(tmp);
}
Serial.print(':');
lcd.setCursor(2, 1);
lcd.print(':');
tmp = now.minute();
if (now.minute() < 10) {
Serial.print('0');
Serial.print(now.minute(), DEC);
lcd.setCursor(3, 1);
lcd.print('0');
lcd.setCursor(4, 1);
lcd.print(tmp);
}
else {
Serial.print(now.minute(), DEC);
lcd.setCursor(3, 1);
lcd.print(tmp);
}
Serial.print(':');
lcd.setCursor(5, 1);
lcd.print(':');
tmp = now.second();
if (now.second() < 10) {
Serial.print('0');
Serial.print(now.second(), DEC);
lcd.setCursor(6, 1);
lcd.print('0');
lcd.setCursor(7, 1);
lcd.print(tmp);
}
else {
Serial.print(now.second(), DEC);
lcd.setCursor(6, 1);
lcd.print(tmp);
}
Serial.print (' ');
lcd.setCursor(8, 1);
lcd.print(' ');
// Serial.println();
for (int i=0;i<span;i++) {
aRead = aRead + analogRead(potPin);
// Serial.print(aRead);
// Serial.print(' ');
}
// aRead = aRead / span;
temperature = (aRead / span * 500.0 / 1024.0);
// Serial.print(aRead);
// Serial.print(' ');
// Serial.print(temperature);
// Serial.print(' ');
printTenths(long (temperature * 10));
lcd.setCursor(14, 1);
lcd.print(char(223));
lcd.setCursor(15, 1);
lcd.print('C');
delay(200);
// Serial.print(" since 2000 = ");
// Serial.print(now.get());
// Serial.print("s = ");
// Serial.print(now.get() / 86400L);
// Serial.println("d");
// calculate a date which is 7 days and 30 seconds into the future
// DateTime future (now.get() + 7 * 86400L + 30);
// Serial.print(" now + 7d + 30s: ");
// Serial.print(future.year(), DEC);
// Serial.print('/');
// Serial.print(future.month(), DEC);
// Serial.print('/');
// Serial.print(future.day(), DEC);
// Serial.print(' ');
// Serial.print(future.hour(), DEC);
// Serial.print(':');
// Serial.print(future.minute(), DEC);
// Serial.print(':');
// Serial.print(future.second(), DEC);
// Serial.println();
// Serial.println();
// delay(3000);
}
Labels:
Arduino,
Date,
Datetime,
DS1307,
Freeduino,
LCD,
LM35,
RTC,
rtc sensor shield,
Sensor,
Temperature,
Time
2012/05/01
Freeduino/Arduino RTC Sensor Shield To Display Date and Time In Arduino Serial Monitor Using Wire.h + RTClib.h
First, download RTClib.h from the following link.
There is a new version using Time.h library and showing day of week.
Pins Used
Analog pins 4 and 5 are used for I2C protocol implemented by Maxim DS1307.
Serial Monitor Output
Sketch
// Date and time functions using a DS1307 RTC connected via I2C and Wire lib
// 2010-02-04 <jcw@equi4.com> http://opensource.org/licenses/mit-license.php
// $Id: ds1307.pde 4773 2010-02-04 14:09:18Z jcw $
// Revised by Befun Hung <bfhorng@ms4.hinet.net> 2011-11-13
// RTClib.h download webpage http://www.ladyada.net/make/logshield/download.html
// File Name: DS1307RTClib.pde - Display Date And Time in Arduino Serial Monitor
// The sketch works on Arduino IDE 0022
#include <Wire.h>
#include <RTClib.h>
RTC_DS1307 RTC;
void setup () {
Serial.begin(9600);
Wire.begin();
RTC.begin();
// following line sets the RTC to the date & time this sketch was compiled
// RTC.adjust(DateTime(__DATE__, __TIME__));
}
void loop () {
DateTime now = RTC.now();
Serial.print(now.year(), DEC);
Serial.print('/');
if (now.month() < 10) {
Serial.print('0');
}
Serial.print(now.month(), DEC);
Serial.print('/');
if (now.day() < 10) {
Serial.print('0');
}
Serial.print(now.day(), DEC);
Serial.print(' ');
if (now.hour() < 10) {
Serial.print('0');
}
Serial.print(now.hour(), DEC);
Serial.print(':');
if (now.minute() < 10) {
Serial.print('0');
}
Serial.print(now.minute(), DEC);
Serial.print(':');
if (now.second() < 10) {
Serial.print('0');
}
Serial.print(now.second(), DEC);
Serial.println();
delay(995);
}
Subscribe to:
Posts (Atom)


